Rountine Maintenance (continued)
Installing New Dustbag Ref: E82
Fold dustbag flaps of new bag back and slide into unit. Make sure inlet goes into opening on dustbag.
Replace dustbag cover on unit.
NOTE: Dustbag cover cannot be closed unless the dustbag is installed properly.
Pull the Smartbox out of the cleaner.
Models Z2915 Z2920 Z2925
Emptying and Cleaning the Smartbox
NOTE: Switch cleaner off at the mains and remove plug from the electricity supply before emptying or cleaning the Smartbox.
Emptying the Smartbox:
It is important to empty the smartbox regularly. DO NOT allow the Smartbox to become too full.
Remove dustbag/Smartbox cover.
Pull the Smartbox apart and empty the dust and debris into a dustbin. Brush out the smartbox to remove the excess.
Washing the Smartbox:
The Smartbox can be washed in warm water. A small amount of washing up liquid may be added. A brush may be used to remove stubborn dust. Rinse the Smartbox thoroughly and remove the excess water with a dry cloth. Dry the dust container thoroughly (24 hours is preferred) before refitting to the cleaner.
7
