Electrolux Z425 Series manual Do not leave vacuum cleaner when plugged in. Turn

Models: Z425 Series

1 8
Download 8 pages 25.44 Kb
Page 2
Image 2
13 Amp Fuse
13
Brown
Cord Clamp

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.

WARNING

IMPORTANT INFORMATION

To reduce the risk of fire, electric shock, or injury :

• Do not unplug by pulling on cord. To unplug, grasp the plug, not

Do not use outdoors or on wet surfaces.

the cord.

• Do not leave vacuum cleaner when plugged in. Turn

• Do not handle plug or vacuum cleaner with wet hands or operate

 

off the switch and unplug the electrical cord when not in

without shoes.

 

use and before servicing.

• Do not put any object into openings. Do not use with any opening

Do not allow to be used as a toy. Close attention is

blocked; keep free of dust, lint, hair, and anything that may reduce

 

necessary when used by or near children.

airflow.

Use only as described in this manual. Use only

• This vacuum cleaner creates suction and contains a revolving

 

manufacturer’s recommended attachments.

brushroll. Keep hair, loose clothing, fingers, and all parts of body

Do not use with damaged cord or plug. If vacuum cleaner

away from openings and moving parts.

 

is not working as it should, has been dropped, damaged,

• Do not pick up anything that is burning or smoking, such as

 

left outdoors, or dropped into water, return it to a service

cigarettes, matches, or hot ashes.

 

center before using.

• Do not use without dust cup or filter in place.

Do not pull or carry by cord, use cord as a handle, close

• Use extra care when cleaning on stairs.

 

door on cord, or pull cord around sharp edges or corners.

• Do not use to pick up flammable or combustible liquids such as

 

Do not run vacuum cleaner over cord. Keep cord away

gasoline, or use in areas where they may be present.

 

from heated surfaces.

• Store your cleaner indoors in a cool, dry area.

Do not use extension cords or outlets with inadequate

• Keep your work area well lighted.

 

current carrying capacity.

• Unplug electrical appliances before vacuuming them.

Turn off all controls before unplugging.

 

 

SAVE THESE INSTRUCTIONS

BEFORE YOU START

CHECK THE VOLTAGE

Before connecting the cleaner to an electrical supply, ensure that the voltage shown on the rating plate located beneath the cleaner is of the correct voltage for your electricity supply. If it is not, do not use the cleaner but refer back to your dealer.

CONNECTING TO YOUR ELECTRICITY SUPPLY

Permanently connected to the cleaner is a mains supply (2-core) cable fitted with a non-rewirable plug incorporating a 13A fuse.

In the event of the fuse requiring replacement the fuse cover should be removed using a small screwdriver. The old fuse MUST be replaced by a 13A ASTA approved BS1362 fuse or a BSI approved fuse. The cover must be replaced before the plug is used again. In the event of loss of the fuse cover, replacements can be obtained from your Electrolux Retailers and must be of the same colour as indicated by the coloured insert on the base of the plug.

If difficulty is experienced in obtaining a replacement, contact Electrolux Customer Services on 08706 055055.

In no circumstances must the plug be used without a correct fuse cover fitted.

If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted. Remove the fuse from the cut off plug.

The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a 13 amp socket in another part of your home.

The wires in the mains cable of this appliance are coloured in accordance with the following code: Blue: Neutral. Brown: Live.

As the colours of the wires in the mains cable of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

If using a three-pin plug, do not make any connection to the terminal marked with the letter E or by the earth symbol or coloured green or green-and-yellow. This cleaner is double insulated and no earth connection is necessary.

It is in your interest to ensure that the plug is correctly attached to the mains cable. In case of doubt, consult a qualified electrician, as Electrolux cannot regard the repair of faults on the plug connection as a service that can be given free of charge under the terms of the guarantee.

Fuse Cover

WARNING

Proprietary carpet conditioning and air freshening materials

After using proprietary carpet conditioning powders, it is recommended that the

filters be changed. Some of these preparations contain substances which if left in the Fuse Blue vacuum cleaner for extended periods could damage the plastic mouldings which form

the structure of the cleaner.

Many air fresheners, household deodorants, sprays and polishes contain a highly flammable gas propellant.

Because of this, it is particularly important that these products are used strictly in accordance with the relevant manufacturer’s instructions. It is essential that none of the above products are sprayed directly into the vacuum cleaner or any of its filters, hose assembly, dustbag chamber or dust cup.

Thermal Cut Off

This vacuum cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the cleaner shuts off, turn off the switch and unplug the cleaner. Check the cleaner for a possible source of overheating such as a full dust cup or a clogged filter. After the 60 minute period, plug the cleaner back in and push the on/off switch On (I). If the cleaner still does not run, please call Electrolux Customer Care.

2

Page 2
Image 2
Electrolux Z425 Series manual Do not leave vacuum cleaner when plugged in. Turn