QUICK REFERENCE
Dust Cup Release Button
Handle Grip
Handle Release
QUICK REFERENCE HOW TO ASSEMBLE
3
2
Cord Retainer
Handle Tube
Off / Suction / Brushroll Switch
Dust Cup
Locked Brushroll
Indicator
Clean Out
Port (Open)
Lock Button
Button 5
Cord Hooks
4
Receiving Tube
1
Connector Pins
HOW TO ASSEMBLE
Assemble completely before using.
1. Attaching or Removing Floor Nozzle.
Align the lock button on the floor nozzle neck with the hole in the receiving tube on the main body. Push the lock button and slide the floor nozzle into the main body until it clicks into place. Push the lock button in and pull on the floor nozzle to remove it from the main body.
2. Attach Handle Grip.
Align the lock button on the handle tube with the hole in the handle grip. Push the lock button and slide the handle into place
3. Attach handle tube to the cleaner.
Insert the end of the handle tube with the guide tabs into the cleaner. Push the handle release button to get the handle tube fully inserted.The handle is properly inserted when you hear a click.
Brushroll
4. Store Cord (using cord hooks).
Pull the electrical cord down around the lower cord hook, then wrap cord around upper and lower cord hooks. Fasten plug to electrical cord to prevent unwinding.
5. Store Unit.
Push the telescoping handle release button to lower the handle into its compact storage position. The handle is locked down when a click is heard.
4
