BEFORE YOU START

CHECK THE VOLTAGE

Before connecting the cleaner to an electrical supply, ensure that the voltage shown on the rating plate located beneath the cleaner is of the correct voltage for your electricity supply. If it is not, do not use the cleaner but refer back to your dealer.

CONNECTING TO YOUR ELECTRICITY SUPPLY

Permanently connected to the cleaner is a mains supply (2-core) cable fitted with a non-rewirable plug incorporating a 13A fuse.

In the event of the fuse requiring replacement the fuse cover should be removed using a small screwdriver. The old fuse MUST be replaced by a

13A ASTA approved BS1362 fuse or a BSI approved fuse. The cover must be replaced before the plug is used again. In the event of loss of the fuse cover, replacements can be obtained from your Electrolux Retailers and must be of the same colour as indicated by the coloured insert on the base of the plug.

If difficulty is experienced in obtaining a replacement, contact Electrolux Customer Services on 08706 055055.

In no circumstances must the plug be used without a correct fuse cover fitted.

If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted. Remove the fuse from the cut off plug.

The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a 13 amp socket in another part of your home.

The wires in the mains cable of this appliance are coloured in accordance with the following code: Blue: Neutral. Brown: Live.

As the colours of the wires in the mains cable of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

If using a three-pin plug, do not make any connection to the terminal marked with the letter E or by the earth symbol or coloured green or green-and- yellow. This cleaner is double insulated and no earth connection is necessary.

It is in your interest to ensure that the plug is correctly attached to the mains cable. In case of doubt, consult a qualified electrician, as Electrolux cannot regard the repair of faults on the plug connection as a service that can be given free of charge under the terms of the guarantee.

Fuse

13 Amp Fuse

E

Cover

 

N L

Fuse BlueBrown

Cord

Clamp

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product

Page 2 Page 4
Page 3
Image 3
Electrolux Z8800 Series manual Before YOU Start Check the Voltage
Page 2 Page 4

Z8800 Series specifications

The Electrolux Z8800 Series vacuum cleaners represent a remarkable blend of advanced technology, user-friendly design, and powerful cleaning capabilities. Designed with the modern home in mind, they cater to a variety of cleaning needs while ensuring that the experience is effortless and effective.

One of the standout features of the Z8800 Series is its powerful suction capability. Equipped with high-performance motors, these vacuums deliver exceptional cleaning power across various surfaces, from carpets to hardwood floors. The advanced cyclonic technology used in the series separates dirt and debris from the air, ensuring consistent suction without clogging, which is a common issue in many traditional vacuum cleaners.

The Z8800 Series also boasts a range of user-friendly technologies that enhance the overall cleaning experience. The ergonomic handle design minimizes strain during use, while the lightweight structure allows for easy maneuverability, making it simple to carry the vacuum from room to room. Additionally, the vacuum is designed with adjustable height settings, allowing for tailored cleaning on different floor types.

Another key characteristic of the Electrolux Z8800 Series is its filtration system. Equipped with a HEPA filtration system, it captures up to 99.97% of dust and allergens as small as 0.3 microns. This is particularly beneficial for those with allergies or respiratory issues, providing cleaner air and a healthier living environment.

The dust canister in the Z8800 Series is designed for easy emptying, ensuring minimal contact with dust and debris. This no-touch feature improves hygiene and convenience, allowing users to dispose of collected dirt without creating a mess. The large dust capacity means less frequent emptying, enabling longer cleaning sessions.

Moreover, the Z8800 Series includes a variety of attachments and tools designed for specialized cleaning tasks. The upholstery tool, crevice nozzle, and dusting brush allow users to clean furniture, tight corners, and delicate surfaces with ease. This versatility makes the Z8800 Series an excellent choice for households that require thorough cleaning across different areas.

In terms of design, the Z8800 Series is sleek and modern, available in an array of stylish colors. Its compact size ensures it can be stored easily, whether in a closet or under the bed, saving space in the home.

The Electrolux Z8800 Series combines power, convenience, and efficiency to provide a superior cleaning experience. With its advanced features and thoughtful design, it stands out as a top choice for anyone looking to enhance their cleaning routine and maintain a pristine home environment.
Top Page Image Contents