Remove base plate and clean debris from

Problem Solving

CAUTION: Turn off the switch and unplug the electrical cord before servicing.

Problem	Cause	Solution

Motor will not start.	Power Plug	• Push plug securely into outlet.
		• Try another outlet.
		• Check circuit breaker.
	On/Off Switch	• Turn on/off switch to .
	Thermal Cut Off	• Refer to page 2.

Motor suddenly stops.	Thermal Cut Off	• Refer to page 2.

Does not clean carpet or hard	Dust Cup and Filter(s)	• Empty the dust cup and/or change the filters.
floor		Hint: If picking up fine dust, the dust cup may
		not look full, but a fine substance tends to
		reduce suction when it blocks airflow through
		the foam filter. Make sure the foam filter is
		installed properly.
	Belt	• Replace a cut, or out of shape belt.
	Brush Roll	• Clean hair and thread from bristles and end
		cap area. Replace brush roll if bristles are
		worn.
	Hose	• Remove any clogs from the hose that restrict
		the airflow. See pages 12.
	Hard Floor Setting	• For hard floor cleaning, make sure brush roll
		control is in hard floor position.
	Cleaner Height Setting	• For carpet use-make sure proper level is
		selected, for hardfloor-hardfloor is selected.
	Clear tube blockage	• See pages 12.

No suction at the end of the hose	Dust Cup and Filter(s)	• Empty the dust cup and/or change the filters.
		Hint: If picking up fine dust, the dust cup may
		not look full, but a fine substance tends to
		reduce suction when it blocks airflow through
		the foam filter. Make sure the foam filter is
		installed properly.
	Hose	• Remove any clogs from the hose that restrict
		the airflow. See pages 12.
		• Check hose for cuts or holes.
	Clear tube blockage	• See pages 12.

Noise from the brush roll area	Brush roll	• Remove base plate and clean debris from the
		brush roll compartment.
	Belt	• Replace a cut or out of shape belt.

Cleaner is hard to push	Cleaner Height Setting	• Turn adjustment knob to a higher position.
	Belt	• Replace a cut or out of shape belt.

Brush roll with not turn	Belt	• Replace a cut or out of shape belt.

Does not clean carpet or floor	Cleaner height setting	• Try alternate height settings.

Handle will not release	Handle release pedal	• Step on outer edge of pedal to release.

Z8800 Series specifications

The Electrolux Z8800 Series vacuum cleaners represent a remarkable blend of advanced technology, user-friendly design, and powerful cleaning capabilities. Designed with the modern home in mind, they cater to a variety of cleaning needs while ensuring that the experience is effortless and effective.

One of the standout features of the Z8800 Series is its powerful suction capability. Equipped with high-performance motors, these vacuums deliver exceptional cleaning power across various surfaces, from carpets to hardwood floors. The advanced cyclonic technology used in the series separates dirt and debris from the air, ensuring consistent suction without clogging, which is a common issue in many traditional vacuum cleaners.

The Z8800 Series also boasts a range of user-friendly technologies that enhance the overall cleaning experience. The ergonomic handle design minimizes strain during use, while the lightweight structure allows for easy maneuverability, making it simple to carry the vacuum from room to room. Additionally, the vacuum is designed with adjustable height settings, allowing for tailored cleaning on different floor types.

Another key characteristic of the Electrolux Z8800 Series is its filtration system. Equipped with a HEPA filtration system, it captures up to 99.97% of dust and allergens as small as 0.3 microns. This is particularly beneficial for those with allergies or respiratory issues, providing cleaner air and a healthier living environment.

The dust canister in the Z8800 Series is designed for easy emptying, ensuring minimal contact with dust and debris. This no-touch feature improves hygiene and convenience, allowing users to dispose of collected dirt without creating a mess. The large dust capacity means less frequent emptying, enabling longer cleaning sessions.

Moreover, the Z8800 Series includes a variety of attachments and tools designed for specialized cleaning tasks. The upholstery tool, crevice nozzle, and dusting brush allow users to clean furniture, tight corners, and delicate surfaces with ease. This versatility makes the Z8800 Series an excellent choice for households that require thorough cleaning across different areas.

In terms of design, the Z8800 Series is sleek and modern, available in an array of stylish colors. Its compact size ensures it can be stored easily, whether in a closet or under the bed, saving space in the home.

The Electrolux Z8800 Series combines power, convenience, and efficiency to provide a superior cleaning experience. With its advanced features and thoughtful design, it stands out as a top choice for anyone looking to enhance their cleaning routine and maintain a pristine home environment.

Electrolux Z8800 Series manual Hint If picking up fine dust, the dust cup may

Models: Z8800 Series

Problem Solving

Cause

Solution

Motor will not start.

Motor suddenly stops.

floor

Hint: If picking up fine dust, the dust cup may

• Remove base plate and clean debris from the

Cleaner is hard to push

Brush roll with not turn

Z8800 Series specifications