P0005 Seite 2 Freitag, 20. Februar 1998 11:55 Uhr
Into the water!
∙Check if filter element cover is properly seated.
−fit riser pipe1 to pump 2 and push firmly down.
−attach fountain head.
−attach diverter line.
∙Place pump into water.
Place pump on firm foundation (e. g. bricks), to prevent priming of dirt parti- cles.
Select location so that the fountain head is above the water level.
1
2
Make sure the power cable plug does not get wet.
To prevent water running down the power cable from entering the outlet, always lay out the power cable so that is raises to the power outlet.
∙Lay out power cable.
Water flow!
| B Danger! Electric potential. | 3 | 4 |
Unplug power cable before regulating the |
|
|
water flow. |
|
|
∙Turn flow regulator 3 on pump to adjust the water bell height and intensity of diverter stream.
∙Turn flow regulator 4 on riser pipeto adjust diverter stream intensity.
∙Plug in power cable.
2.2 | Aquapower 2000 |