Table of Contents, Please read first

Table of Contents
1.	Tool Overview	6
2.	Please read first!	7
3.	Safety	7
3.1	Specified conditions of use	7
3.2	Safety information	7
4.	Operation	7
5.	Care and maintenance	7
6.	Available accessories	7
7.	Repairs	7
8.	Environmetal protection	7
9.	Technical specifications	8

2. Please read first!

∙Read these instructions before use. Pay special attention to the safety information.

∙If you notice transport damage while unpacking, notify your supplier immediately. Do not operate the machine!

∙Dispose of the packing in an envi- ronmentally friendly manner. Take to a proper collecting point.

∙Keep these instructions for refer- ence on any issues you may be uncertain about.

∙If you lend or sell this air tool be sure to have the instructions to go with it.

3. Safety

3.1Specified conditions of use

This air tool is used for running, driving and removing nuts and bolts.

This air tool shall only be powered by an air compressor. The max. permissible working pressure stated in the Technical Specifications must not be exceeded. This air tool must not be operated with gases that are explosive, combustible or detrimental to health.

Any other use is not as specified. Use not as specified, alteration of the machine or use of parts that are not approved by the equipment manufac- turer, can cause unforeseeable damage!

3.2Safety information

Danger!When using this air tool follow the safety instructions given below, to exclude the risk of personal injury or material damage.

Keep all documents, supplied with the tool, for future reference.

Observe the statuary accident insurance institution regulations and regulations for the prevention of accidents pertaining to

the operation of air compressors and air tools, where applicable.

Keep your work area tidy – a messy work area invites accidents.

Be alert. Do not operate this tool while under the influence of drugs, alcohol or medication.

Wear hearing protection.

Always use a quick coupler to connect this air tool to a compressor.

Make sure that the max. permissible working pressure stated in the Technical Specifications is not exceeded.

Do not overload tool – use it only within the performance range it was designed for (see Technical Specifications).

Do not touch any rotating parts.

Disconnect tool from air supply before changing sockets or if left unattended.

Do not attempt to repair the tool yourself! Only trained specialists are permitted to service or repair compressors, pressure vessels and air tools.

4.Operation

Caution:

In order for this air tool to func-

tion properly, it must be supplied with sufficient qunatities of pneumatic oil. This can be achieved as follows:

−By a service unit on the compres- sor.

−By a lubricator, installed in the air line or directly on the air tool.

−By adding approx. 3-5 drops of pneumatic oil by hand every 15 minuts of use (constant opera- tion) to the air inlet.

1.Put socket on the drive.

2.Set direction of rotation by sliding the torque regulator into position:

−F (= Forward) clockwise rotation/ driving

−R (= Revers) counter-clockwise rotation/removing

3.Set torque between 1 to 6 at the torque regulator:

−1 = little torque

−6 = Maximum torque

4.Adjust working pressure at the com- pressor (see Technical Specifica- tions for max. permissible working pressure).

5.Connect quick coupler to the com- pressor.

6.To start pull trigger.

ENGLISH

5.Care and maintenance

Danger!

Always disconnect tool from

air supply before servicing.

Repair and maintenance work other than described in this section must only be carried out by qualified spe- cialists.

∙Check all screwed connections for tightness, tighten if necessary.

∙If the tool is not lubricated by a serv- ice unit or a line lubricator, add 3-5 drops pneumatic oil to the air inlet every 15 minutes of use (constant operation).

∙Do not store tool unprotected out- doors or in damp environment.

6. Available accessories

∙Pneumatic oil 0.5 litre

Special oil for air tools, service units and line oilers.

Stock-no. 090 100 8540

∙Add-on lubricator R3/8" female Installs directly on air tool. Sight- glass always indicates oil level. Stock-no. 090 105 4592

7. Repairs

Danger!

Repairs to air tools must be carried out by qualified specialists only!

Air tools in need of repair can be send to the service centre in your country. See spare parts list for address.

Please attach a description of the fault to the power tool.

8. Environmetal protection

The machine's packaging can be 100 % recycled.

Worn out machines and accessories contain considerable amounts of valua- ble raw and plastic materials, which can be recycled.

These instructions are printed on chlo- rine-free bleached paper.

SR 340 specifications

The Elektra Beckum SR 340 is a powerful and versatile saw that caters specifically to the needs of professionals in the construction and woodworking sectors. Renowned for its robust build quality and exceptional cutting performance, the SR 340 has become a favorite among carpenters, builders, and DIY enthusiasts alike.

One of the standout features of the SR 340 is its powerful motor, which delivers a reliable performance for a range of cutting applications. With a 1400-watt motor, it is capable of handling both softwood and hardwood with remarkable efficiency. This motor ensures smooth vibrations and consistent power output, allowing the user to tackle large projects with confidence.

The SR 340 also boasts an impressive cutting depth of up to 75mm, making it ideal for deeper cuts without the hassle of switching tools. The adjustable cutting angle allows for quick transitions between different cutting requirements, offering users the flexibility they need on the job site. From crosscuts to miters, the SR 340 can adapt to various cutting scenarios easily.

In addition to its powerful motor and cutting capabilities, the Elektra Beckum SR 340 features an intuitive design that prioritizes user comfort and safety. It is equipped with a transparent blade guard that provides visibility while ensuring protection from debris. The ergonomic handle design ensures a secure grip, minimizing fatigue during prolonged use.

The saw also incorporates advanced technological features such as a laser guide, which aids users in achieving precise cuts every time. This feature is particularly beneficial for intricate woodworking projects, where accuracy is paramount.

Durability is another significant characteristic of the SR 340. Built with high-quality materials, it withstands the rigors of demanding job sites while requiring minimal maintenance. The precision-engineered components contribute to its longevity, making it a worthwhile investment for professional tradespeople.

In conclusion, the Elektra Beckum SR 340 is an exemplary saw that combines power, precision, and safety in one compact design. Its features make it suitable for various applications, ensuring that professionals can achieve exceptional results in their work. Whether for cutting beams, panels, or detailed woodworking, the SR 340 does not disappoint, embodying the reliability and performance that Elektra Beckum is known for.

Elektra Beckum SR 340 Table of Contents, Please read first, Safety Specified conditions of use

Models: SR 340