Element Electronics Flat Panel Television

Chapter 2 Installing the TV

 Use a supplied antenna cable to connect the TV signal to the TV’s TV CABLE terminal.

 Connect the DC plug of the AC-DC adapter to the DC 12V port at the back of the TV.

 Connect the AC-DC adapter and its power cord. Connect the power cord to wall outlet.

VHF/UHF IN

 Press the button on the remote to turn on the TV.

Always disconnect the TV from the main voltage when the TV will not be used for

a long period of time. The POWER button on the front panel is only used for

switching the TV into standby, it does not disconnect the device from the main

voltage. To completely disconnect the main voltage, please remove the power

plug from the socket.

 Press the INPUT button on the remote to display the Input List. Use the ▲▼ buttons to

select TV(CABLE/ANTENNA) and press the OK button.

Input Source

 TV(CABLE/ANTENNA)

VIDEO1 (AV)

VIDEO2 (YPbPr)

VIDEO3 (HDMI)

COMPUTER(VGA)

Contents

Main Federal Communications Commission Statement Warnings and Precautions Page LISTENING WITH EARPHONES TABLE OF CONTENTS Chapter 1 Introducing the TV Key Features Package Contents Page Your TV Front/Left /Right Side View and Controls Front View Left Side ViewRight Side View Page Your Remote Control MTS S.MODE P.MODE P.SIZE GUIDE Displays the Program Guide on the EXIT LIST OK INFO Chapter 2 Installing the TV Connecting a TV Cable or an Antenna A. Combination VHF/UHF antenna B. Separate VHF and/or UH F antennas Page Page Page Connecting an A/V Device with Composite Connector Connecting an A/V Device with Component(YPbPr) Connector using or button to select VIDEO2 and press OK button. connected equipment. Page Connecting an AV Equipment with DVI Connector Page Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System Chapter 3 USING THE FEATURES Wide Screen Viewing With the TV connected to a television programming source, press the INPUT button on the Using the Program Guide 28 AUDIO MENU: screen. Use the buttons to select your main menu option. VIDEO MENU: Operating the Menu While in adjustment mode, and use the buttons to change the value of the item. SETUP MENU: TV MENU: Allows you to edit and label channels. If the signal source is TV/VIDOE/YPbPr, the SETUP MENU appears as: buttons to select VIDEO. change the setting, and press the MENU button to exit the menu. Customizing the VIDEO Settings Page buttons to select AUDIO. change the setting, and press the MENU button to exit the menu Customizing the AUDIO Settings Page buttons to select TV. changes the setting, and press the MENU button to exit the menu. Customizing the TV Settings buttons to select SETUP. change the setting, and press the MENU button to exit the menu. Customizing the SETUP Settings Page Page ENGLISH 39 Chapter 3 Using the TV buttons to select SETUP. Block menu. Using the Program Block Settings password is 0000. Page Page Page Page SPECIFICATIONS COAXIAL Features and Specications are subject to change without notice. COAXIAL DISPLAY MODE Video signal: (VGA Standard)