Element Electronics Flat Panel Television , ,

30

Chapter 3 Using the TV

 Press the button to turn the TV on.

 Press the MENU button on the remote control to display the Main menu, and use the

◄► buttons to select VIDEO.

 Use the ▲▼buttons to highlight an individual VIDEO option, use the ◄► buttons to

change the setting, and press the MENU button to exit the menu.

 The VIDEO menu includes the following options:

Picture Mode Cycles through the display types: Vivid/Hi-Bright/Cinema/Sport

Contrast Controls the difference between the brightest and darkest regions of

the picture

Brightness Controls the overall brightness of the picture

Saturation Controls the color intensity

Hue Controls the difference between the green and red regions of the

picture

Sharpness Increase this setting to see crisp edges in the picture; decrease it for

soft edges

Customizing the VIDEO Settings

▪ If the signal source is TV/VIDEO/SVIDEO/YPbPr/

HDMI, the VIDEO MENU appears as:

▪ If the signal source is VGA, the VIDEO MENU

appears as:

Picture Mode Vivid

Brightness 54

Contrast 50

Saturation 54

Hue 0

Sharpness 5

Color Temperature

Noise Reduction Medium

Video

Enter Select Exit

Picture Mode Vivid

Contrast 50

Brightness 54

Color Temperature

Noise Reduction Medium

VGA

Video

Enter Select Exit

Contents

Main Federal Communications Commission Statement Warnings and Precautions Page LISTENING WITH EARPHONES TABLE OF CONTENTS Chapter 1 Introducing the TV Key Features Package Contents Page Your TV Front/Left /Right Side View and Controls Front View Left Side ViewRight Side View Page Your Remote Control MTS S.MODE P.MODE P.SIZE GUIDE Displays the Program Guide on the EXIT LIST OK INFO Chapter 2 Installing the TV Connecting a TV Cable or an Antenna A. Combination VHF/UHF antenna B. Separate VHF and/or UH F antennas Page Page Page Connecting an A/V Device with Composite Connector Connecting an A/V Device with Component(YPbPr) Connector using or button to select VIDEO2 and press OK button. connected equipment. Page Connecting an AV Equipment with DVI Connector Page Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System Chapter 3 USING THE FEATURES Wide Screen Viewing With the TV connected to a television programming source, press the INPUT button on the Using the Program Guide 28 AUDIO MENU: screen. Use the buttons to select your main menu option. VIDEO MENU: Operating the Menu While in adjustment mode, and use the buttons to change the value of the item. SETUP MENU: TV MENU: Allows you to edit and label channels. If the signal source is TV/VIDOE/YPbPr, the SETUP MENU appears as: buttons to select VIDEO. change the setting, and press the MENU button to exit the menu. Customizing the VIDEO Settings Page buttons to select AUDIO. change the setting, and press the MENU button to exit the menu Customizing the AUDIO Settings Page buttons to select TV. changes the setting, and press the MENU button to exit the menu. Customizing the TV Settings buttons to select SETUP. change the setting, and press the MENU button to exit the menu. Customizing the SETUP Settings Page Page ENGLISH 39 Chapter 3 Using the TV buttons to select SETUP. Block menu. Using the Program Block Settings password is 0000. Page Page Page Page SPECIFICATIONS COAXIAL Features and Specications are subject to change without notice. COAXIAL DISPLAY MODE Video signal: (VGA Standard)