ATTACH THE FIX PLATES
1.Make sure that the material and frame are lying face down on a clean, dry and non‐abrasive surface.
2.Center the material inside the frame.
Note: The material will be noticeably smaller because stretching the material is required to create a sufficient amount of tension for perfect material flatness.
3.Start attaching the Fix Plates in the center of the Horizontal Curved Frame’s edge and (1) then alternate with the center short sides (2).
Note: Follow these instructions to make sure the material is properly fixed in the center position of the frame. After attaching the Fix Plates in sequence #2 (the center of the short sides), please remove the fix plates in sequence #1 (the center of the long horizontal edge) and reattach them again, and
also remove the fix plates on sequence# (2) and reattach them again.
4.Then continue to follow our recommended order numbers 3‐8 to properly distribute tension to the screen material.
7
Rev.052611‐AS |
|
www.elitescreens.com | info@elitescreens.com |
