Three Section Frame
(For large presentation screens that are 120” or more in diagonal measurement)
1. Take the frame out of the case and remove its wrappings. Unfold the main joints making sure that both the end and middle spans are in prefect alignment as shown in (fig 4).
2. Make sure that the snap latches have locked the joints in the frame so that it is at its full horizontal extension as shown in (fig 5)
3. While holding the bottom of the frame in place, lift the top of the frame to unfold the sides which will cause the snap latches lock when fully extended. Secure the corner braces into the locked position. The screen frame should now be fully opened as in (fig 6).
fig 4
Snap latch
Lock down the corners
www.elitescreenscom
Top
Snap latch
fig 6
info@elitescreens.com
