Xerox 4213 manual Cursor positioning commands, Line Spacing

LJ SERIES 2D EMULATION

Syntax

E&l#C

where # is the distance between rows in 48ths of an inch. # must be between 0 and 336. The # is valid to four places to the right of the decimal point. Use the following formula to calculate the VMI:

VMI = 48 ÷ lines per inch

Example To print four lines per inch, set the VMI to 12:

E&l12C

Hex	1B 26 6C 31 32 43
Dec	27 38 108 49 50 67

Line Spacing

Purpose The Line Spacing command affects the VMI in lines per inch. The command specifies the number of lines per inch to be printed.

Syntax E &l#D

where # is one of the following valid settings for lines per inch: 1, 2, 3, 4, 6, 8, 12, 16, 24, 48.

Example To set line spacing at eight lines per inch, enter:

E&l8D

Hex	1B 26 6C 38 44
Dec	27 38 108 56 68

Cursor positioning commands

The cursor positioning commands specify exactly where the next character or graphic is to be placed on the page. These commands define print position in 300ths of an inch (spots), 720ths of an inch (decipoints), and columns or rows.

3-26 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE