Xerox 4213 manual Text Placement Absolute, Example Enter

XES COMMAND LANGUAGE MODE

Where to place it Immediately before the beginning of the line for which the new spacing is intended (preferably, at the end of the previous line).

Example Enter:

These lines of text have normal, single lineL spacing until you enter a Line Spacing AbsoluteL command with a parameter of 75.Eip75L

At this point,the baselines of the text areL placed 75 pixels (one quarter inch) apartL like this.Ei0L

To return to the previous line spacing, enterL Line Spacing or Line Spacing Absolute withL the original spacing value,L

or if at the end of the job, issue E+X to reset to defaults.L

To produce:

These lines of text have normal, single line

spacing until you enter a Line Spacing Absolute command with a parameter of 75.

At this point,the baselines of the text

are placed 75 pixels (one quarter inch) apart

like this.

To return to the previous line spacing, enter Line Spacing or Line Spacing Absolute with the original spacing value,

or if at the end of the job, issue to reset to defaults.

More The printer always prints at least one line per page, no matter how high the parameter entered for spacing.

Text Placement Absolute

Purpose Places text in any specified location on the page, starting from the page origin. It can also be used to place logos, signatures, or any other data that has been digitised into font characters.

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 2-57