Xerox 4213 Setdefaulttrayswitch Boolean setdefaulttrayswitch, Settrayswitch Boolean settrayswitch

POSTSCRIPT EMULATION

setdefaulttrayswitch*	Ð boolean setdefaulttrayswitch
	Sets automatic tray switching on or off. If this feature						is turned
	on, and the specified trays runs out of paper, the printer will
	search other trays for the same size paper and continue						printing.
	If no paper of the same size is found, then the User Interface
	indicates out of paper. The sequence used to search the other
	paper trays is selectable through the User Interface, and is
	described in appendix A4 of the 4213 User Guide.
defaulttrayswitch	Ð defaulttrayswitch boolean
	This	operator	returns	a	boolean	indicating	whether
	defaulttrayswitch		is on (true) or off (false).
settrayswitch	Ð boolean settrayswitch
	This operator turns automatic tray switching on or off for the
	current job only. On is true and off is false. When the current
	job ends, automatic tray selection is determined by the value of
	defaulttrayswitch.
trayswitch	Ð trayswitch boolean
	This operator returns a boolean indicating whether automatic tray
	switching is on (true) or off (false).
manualfeed	Ð manualfeed boolean
	This variable determines whether paper will be fed from the
	manual	feeder.	If set to true, then the			printer will request that
	the next sheet be loaded in the manual feed slot. The image will
	be formatted to the last paper size selected, either by default,
	requesting a specific tray or using the papername operator to
	request specific imageable area.
lettertray	Ð lettertray
	This causes the 4213 to look for a tray with letter size paper. If
	such a tray is found, the page type is set to letter and papertray

is set to that tray. If a tray with letter size paper is not found, a rangecheck error occurs and the page type and papertray values are not changed.

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 4-9