Xerox 4213 manual Horizontal Motion Index, Vertical Motion Index

LJ SERIES 2D EMULATION

Example To enable Perforation Region, enter:

E &l1L
Hex	1B 26 6C 31 4C
Dec	27 38 108 49 76

Horizontal Motion Index

Purpose

Syntax

The Horizontal Motion Index (HMI) command determines the distance between columns. When proportional spaced fonts are selected, the HMI command affects only the space character. When fixed-space fonts are selected, the HMI command affects all the printable characters.

E&k#H

where # is a number between 0 and 840 representing the width of a column in units of 1/120th of an inch. The # is valid up to four places to the right of the decimal point.

The HMI is reset to the current default when font orientation, symbol set, height, pitch, or spacing are set, and when the current font is changed. The default value of HMI depends on the current font. Use the following formula to calculate the HMI:

HMI = 120 ÷ characters per inch

Example To set the HMI for a 12 pitch font (12 characters per inch), enter:

E&k10H

Hex 1B 26 6B 31 30 48

Dec 27 38 107 49 48 72

Vertical Motion Index

Purpose The Vertical Motion Index (VMI) command sets the distance between rows in 48ths of an inch. The default VMI is 8/48ths which prints as six lines per inch.

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 3-25