Xerox 4213 manual Egl5150,1050,300,600,600,975,900,525,1200,1050L

XES COMMAND LANGUAGE MODE

More You can have as many sets of coordinates for a line as desired.

If the value for X1 is omitted, the printer uses the x-coordinate from the current graphic position. If this line is the first graphic image drawn in the window, the x-coordinate of the window origin is substituted for the x-value.

If the value for Y1 is omitted, the printer substitutes the y- coordinate from the current graphic position. If this line is the first graphic drawn in the window, the y-coordinate of the window origin is used as the y-value.

If the value for X2 is omitted, the printer repeats the first x- coordinate, X1. For all succeeding coordinates, the x-coordinate of the preceding point is used as a default if a new value is missing.

If the value for Y2 is omitted, the printer repeats the first y- coordinate, Y1. For all succeeding coordinates, the y-coordinate of the preceding point is used as a default if a new value is missing.

Example To create the line in figure 2-27 which is five pixels thick and

draws four lines between five pair of coordinates, enter:

Egl5;150,1050,300,600,600,975,900,525,1200,1050L

2-94 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE