Xerox 4213 manual Syntax Example, Es10H

LJ SERIES 2D EMULATION

Syntax

Example

Syntax

E(s#H

where # is a real number valid up to two decimal places.

The Pitch command for the secondary font is:

E)s#H

To set the primary font as 12-pitch and the secondary font as 10- pitch, enter:

E(s12H

Hex	1B 28 73 31 32 48
Dec	27 40 115 49 50 72

The Pitch command for the secondary font is as follows:

E)s10H

Hex	1B 29 31 30 48
Dec	27 41 49 48 72

Height

Purpose

Syntax

The Height command selects the character height of the font in points (72nds of an inch). There are separate commands to select height for the primary and secondary fonts. If the selected height is unavailable, the closest match is used. Fonts within a quarter of a point of the requested height are seen by the printer as identical selections.

E(s#V

where # is the selected height in points up to two decimal places.

The Height command for the secondary font is:

E)s#V

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 3-39