C
cable length, 1-1 t centreing, 2-52 character formatting, 2-68 commands
ignored by the 4213, XES, E-1 t macro, 3-60 to 3-62
to avoid on the 4213, XES, E-2 t Canadian EME regulations, iii cancelling User-Defined Key, 2-7 Cannon connector, 1-13 capacity for graphic windows, 2-84 Carriage Return (CR), 3-34, D-1 cartridge fonts, 3-9
Centre, 2-54
centreing and justifying between margins, 2-52 Centronics
connector, 1-3 interface, 1-1
connector, 1-3 f
voltage and current requirements, 1-7 t signals and pin assignments, 1-4 to 1-5 signal timing and voltage levels, 1-6
certification, approvals, iii
changing placement for a magnified window, 2-86 f channel baud options, 4-4
Channel select, E-1 t character
codes on the Xerox 4213, 2-107 to 2-108 final parameter, 3-11
formatting, 2-68 group, 3-10 parameter, 3-11 variable sequence, 3-10
Character Code, 3-49 to 3-50 tables, A-1 t to A-21 t
Character Descriptor and Data, 3-50 character pitch, conversion table
1/60-inch units to 12-pitch characters, B-9 t 1/60-inch units to 10-pitch characters, B-10 t 1/300-inch units to 12-pitch characters, B-11 t 1/300-inch units to 10-pitch characters, B-12 t
Character Reassignment, 2-112 to 2-113 characteristics
fonts, 3-1 to 3-9
font selection, 3-5 to 3-9 graphic window, 2-79 to 2-81
Character Spacing Absolute, E-2 t
Cinch DB-25P connector, 1-13 class B, iii
Clear Horizontal Margins, 3-23 code
assignments ASCII, D-3 t EBCDIC, D-5 t ISO, D-4 t
mappings tables, A-1 to A-21 numbers, typefaces, 3-43 t
coding schemes, supported, 2-108 combining escape sequences, 3-12 to 3-13 f command
job control, 2-4 mode change, 2-2 simple, 2-5 printed output, 2-6 structure, PCL4, 3-9 to 3-13 syntax, 2-3 user-entered variables, 2-5
commands in printed output, 2-6 Comment, 2-28 to 2-29 compatibility, font, 3-1
completed table download record, 2-118 f Complex Print, E-1 t
conductors, number of, 1-1 t
configuring 4213 for XES commands 2-1 to 2-5 connector
Amphenol 36-pin, 1-3 Cannon, 1-13 Centronics interface, 1-3 f Cinch DB-25P, 1-13 DataProducts, 1-8 RS232C (serial), 1-13 f
constant page creating, 2-74 merging, 2-76
control codes, 2-108, 3-9
for cursor positioning, 3-34 to 3-35 serial interfaces, D-1 t to D-2 t
conventions used in this manual, xxi to xxii conversion tables
character pitch, B-9 t to B-12 t inches, B-2 t to B-4 t millimetres, B-5 t to B-8 t units of measure, B-1 to B-12 t
converting User-Defined Key to printable character, 2-6 to 2-7
