Xerox 4213 manual Clear Horizontal Margins, Top Margin, Text Length

LJ SERIES 2D EMULATION

Clear Horizontal Margins

Purpose The Clear Horizontal Margins command causes the left and right margins to be reset to their default values at the left and right edges of the printable area.

Syntax

E 9

Hex	1B 67 39
Dec	27 103 57

Top Margin

Purpose

Syntax

Example

The Top Margin command sets the distance between the top of the printable area and the top of the text regardless of paper orientation. The top margin is defined as a number of lines. The height of the lines is determined by the Vertical Motion Index (VMI) command, which sets the vertical spacing of lines. The VMI is used as a unit of measurement for setting the margin, but once set, the margin does not change with later VMI commands.

E&l#E

where # is the number of the line on which text starts.

To set the top margin at six lines, enter:

E &l6E
Hex	1B 26 6C 36 45
Dec	27 38 108 54 69

Text Length

Purpose The Text Length command sets the number of lines on which text may be printed. If the Vertical Motion Index (VMI) is zero, or the sum of the text length and the top margin is greater than the length of the printable area, the command is ignored.

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 3-23