Xerox 4213 manual Formatting the printed output

XES COMMAND LANGUAGE MODE

More Once the printer receives the Reset command, all parameters set by the other commands are cancelled, including font indexes and the UDK.

Using a Print Job rather than a Reset command to end one document and start the next instructs the printer to continue using all parameters entered during previous jobs.

Formatting the printed output

The commands discussed in this section determine the formatting of the job's printed outputÐhow many copies will be printed, which paper tray you will print from, whether the document is 1-sided or 2-sided, and so on. These commands are:

ÐPrint Multiple Copies

ÐPrint Multiple Copies (Non-Collated)

ÐPaper Tray

ÐBypass Slot Paper Size

ÐOffset

Ð2-sided Start

Ð2-sided Invert Start

Ð2-sided Stop

Ð2-sided Side Select.

You do not need the commands unless you want settings that are different from the defaults.

Also covered in this section is:

ÐComment, which allows you to make notes in your job without their appearing in the printed output or otherwise affecting the job.

2±18 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE