Xerox 4213 manual Origin of the graphic window. X is the distance

XES COMMAND LANGUAGE MODE

X , Y	The origin of the graphic window. X is the distance
	along the page's x-axis from the page's origin	to
	the graphic window's origin. Y is the distance
	along the page's y-axis from the page origin to the
	graphic window origin.
Sx,Sy	The size of the graphic window, in the horizontal
	and vertical directions, respectively. Sx is	the
	number of pixels making up the size in	the

horizontal direction, measured from the graphic window origin. Sy is the number of pixels making up the size in the vertical direction, measured from the graphic window origin.

LLine end.

Where to place it At any place within the document where graphics are desired.

More Fields before the semicolon in the command are optional; fields after it are required. Thus, you could leave the M , I and R fields blank; the printer will still create a window based on the values entered for X,Y,Sx,Sy. If you enter a value for R, but none for M and I, then commas must be inserted in place of M and I. The command for such a window looks like this if 180o rotation is chosen:

Egw,,2;900,3000,600,450L

Example To create a graphic window:

·With no magnification

·Filled with vector commands

·Whose origin is located 900 pixels on the x-axis, 3000 pixels on the y-axis from the origin of the page

·Measuring from its own origin, 600 pixels along its x-axis, 450 pixels on its y-axis,

Enter:

Egw1,2;900,3000,600,450L

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 2-83