Xerox 4213 manual Reset, Purpose, Example

XES COMMAND LANGUAGE MODE

Where to place it At the start of the document data.

Example To begin a job having mixed font orientations, with a Summary Sheet having the comment ªThis page has two font orientationsº, enter:

E+Q,This page has two font orientationsL

More Font selections are entered after Print Job (more about this in the next chapter, ªUsing fontsº). In the example below, notice the ªPº for portrait and the ªLº for landscape in the font names, indicating that both orientations are used.

E+Q,This page has two font orientationsL

E+1Helvetica12i2-PL(Font name is Helvetica12i2-P)

E+2Helvetica10i2-PL(Font name is Helvetica10i2-P)

E+3Helvetica8Bi2-PL(Font name is Helvetica8Bi2-P)

E+3Titan14B-LL (Font name is Titan14B-L)

Margins and all other job contents

E+XL

Reset

Purpose	Sets the boundary marking the end of the job and returns
	parameters to the default settings.
Syntax
		E+X,commentL
	+X		Instruction to end the job.
	,		Optional request for a Summary Sheet to report
			errors upon execution of the next job command.
	comment		Optional comment on a Summary Sheet.
	L		Line end.
Where to place it	After all job data.
Example	To end a job, request a Summary Sheet, and include the
	comment ªThis job is now completeº, enter:

E+X,This job is now completeL

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 2±17