Xerox 4213 manual Tray selection operators

POSTSCRIPT EMULATION

firstside Ð firstside boolean

Returns a boolean indicating whether the image being created will be printed on the first side of a logical page. For the first page of a job, this value is always true.

Tray selection operators

setdefaultpapertray* Ð integer setdefaultpapertray

Four selections are available with the multiple tray 4213:

0UPPER TRAY

1LOWER TRAY

2HCF (High capacity feeder)

3MANUAL/MMF

When beginning a job, the server selects the default paper tray, and sets the size, and imageable area to the size of the paper in that tray. Once the job begins, you can change paper trays and the imageable area in a number of ways (refer to setpapertray, and papername).

defaultpapertray Ð defaultpapertray integer

This operator returns an integer representing the default tray number set in setdefaultpapertray.

setpapertray integer setpapertray Ð

Selects the paper tray to be used for the current job only, using the number assignments defined in setdefaultpapertray above. The imageable area is set by the size of the paper in the tray. This command is used to change the paper tray within a job. The next job will use the tray specified by setdefaultpapertray.

papertray Ð papertray integer

This operator returns an integer indicating which tray to feed from for the current job.

The values returned are:

0UPPER TRAY

1LOWER TRAY

2HCF (High capacity feeder)

3MANUAL/MMF

4-8 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE