Xerox 4213 manual Fill Rectangular Area, Examples of filled rectangles

LJ SERIES 2D EMULATION

Fill Rectangular Area

Purpose	The Fill Rectangular Area command prints the rectangle defined
	by the Vertical and Horizontal Rectangle Size commands and
	specifies whether it is to be filled with shading, one of the fill
	patterns, or solid black. For solid black fill, the Area Fill ID
	command is not required. For shading or a fill pattern, the Area
	Fill ID command must be used ahead of the Fill Rectangular Area
	command.
	The rectangle is printed with its top left corner at the current
	cursor position, which is unaffected by the command. The
	command ignores text boundaries, but any part of the rectangle
	falling outside of the printable area is not printed.
Syntax
		E *c#P
		Hex	1B 2A 63 # 50
		Dec	27 42 99 # 80

where # is a value from table 3-14.

Table 3-14.Fill types for rectangular areas

#

0

2

3

Rectangle Fill Type

Solid Black Fill

Shading

Pattern

Examples of filled rectangles

Example 1 To print a 2- by 3-inch rectangle, enter the following commands: 1. E *p300x300Y

(Moves cursor one inch down and one inch across)

3-58 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE