Xerox 4213 manual Raster Graphics Presentation Mode, Start Graphics

LJ SERIES 2D EMULATION

Table 3-12.Values for graphics resolution

#	Graphics Resolution
75	75 spots per inch
100	100 spots per inch
150	150 spots per inch
300	300 spots per inch

Raster Graphics Presentation Mode

Purpose

Syntax

This command designates how the raster image will appear on the logical page.

E*r#F

where # = 0 - Raster graphics are printed in the orientation of the logical page.

#= 3 - Raster graphics are printed along the width of the physical page, regardless of the orientation of the logical page.

Start Graphics

Purpose The Start Graphics command initialises the printer for subsequent Transfer Raster Data commands and determines the location of the left graphics margin.

The left graphics margin may be set at the left edge of the printable area or at the current X value of the cursor position.

After receiving the Start Graphics command, the printer sets the graphics resolution and left graphics margin until it receives an End Graphics command.

3-52 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE