Xerox 4213 manual Justification Start/Stop, Syntax Where to place it Example

XES COMMAND LANGUAGE MODE

Justification Start/Stop

Purpose Justifies text between right and left margins.

Syntax

Ej

Syntax

Where to place it

Example

jInstruction to start justification.

Ek

kInstruction to stop justification.

Anywhere justification is desired, with the start command placed immediately before the first character in the line to be affected, the stop command placed immediately after the last character in the line to be affected.

To produce:

The printer justifies text by varying space between all the words on the line. However, the printer does not make line ending or hyphenation decisions. You must enter the appropriate line ends for each line.

Enter:

EjThe printer justifies text by varying spaceL between all the words on the line. However,the L printer does not make line ending or hyphenationL decisions. You must enter the appropriate lineL Ek ends for each line.L

More The minimum distance between words cannot be less than half the space character, nor can it be more than three times the space character. If these guidelines are not followed, the printer will not justify the line.

When justifying a single line of text, enter a line end before the Justification Stop command. For example:

EjThis is a single line of text to be justified.LEk

You can justify an entire document by giving the Justification Start command at the beginning of the text. However, to improve the appearance of the text, you may want to enter the Justification Stop command before the last line of each paragraph, then, at the beginning of the next paragraph, enter another Justification Start.

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 2-53