Samsung UE40B8000XWXBT manual Pairing the Remote Control, Auto Pairing, Manual Pairing

¦Pairing the Remote Control

A process that enables two-way communication between the TV and the remote control when their MAC addresses match after the TV saved the MAC address of the remote control and vice versa.

❑Auto Pairing

An automatic pairing method that completes the pairing of the TV and the remote control internally without user intervention when a user operates the remote control after purchasing a TV with a RF remote control.

N If Auto Pairing does not work, refer to the ‘Manual Pairing’.

■When the TV is turned off (Standby mode)

1.Press the POWER(P) button on the RF remote control. N The remote control enters pairing mode.

2.The TV that receives the Power command is turned on.

N The TV enters pairing mode. Pairing mode is maintained until pairing is complete.

3. Pairing mode is completed.

NA buzzer goes off.

■ When the TV is turned on

1. Press any key on the RF remote control.

N The remote control enters pairing mode.

N After paring is complete, the key pressed by the user transmits the corresponding command to the TV.

NThe time taken to complete the pairing and to send the command is less than 1 second.

2.The TV is already in pairing mode.

NA TV, the paring of which is not completed, remains in pairing mode while the TV is turned on.

3.Pairing mode is completed.

NA buzzer goes off.

❑Manual Pairing

You can pair the TV and the remote control so that the remote control only controls the TV. 1. Plug the TV power plug into the power outlet.

N Turn the TV power switch off.

2.Press the PAIRING button on the remote control. N Use a sharp object to press the button.

N Keep a distance of less than 3 feet (1 m) between the TV and the remote control.

3.Press the POWER(P) button on the front panel of the TV. The TV is turned on and Pairing with the remote control is automatically completed.

4.Press the remote control buttons to check if the remote control is properly paired. N If the remote control does not work, attempt the pairing process again.

N If the remote control does not work even after the above measures have been taken, press the RESET button, and replace the batteries.

English - 

BN68-02330E-00Eng.indb 8

2009-6-10 16:33:01