Xerox 4213 manual LJ Series 2D Emulation

LJ SERIES 2D EMULATION

2. E *c600A

(Sets rectangle width at 2 inches.) 3. E *c900B

(Sets rectangle height at 3 inches.)

4. E *c0P

(Prints the rectangle as a black area.)

Example 2 To print a 2- by 3- inch rectangle with 50% shading, enter the following commands:

1. E *p300x300Y

(Moves cursor one inch down and one inch across) 2. E *c600A

(Sets rectangle width at 2 inches.) 3. E *c900B

(Sets rectangle height at 3 inches.) 4. E *c50G

(Uses an Area Fill ID of 50.) 5. E *c2P

(Prints the shaded rectangle.)

Example 3 To print a 2- by 3- inch rectangle filled with a grid-pattern instead of shaded, follow steps 1 through 3 in example 2, and replace steps 4 and 5 with the following commands:

4. E *c5G

(Uses an Area Fill pattern for a grid (ID#5.)

5. E *c3P

(Prints the rectangle filled with a pattern.)

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 3-59