Xerox 4213 manual Line end, Tips on selecting a UDK

XES COMMAND LANGUAGE MODE

Tips on selecting a UDK

When selecting a UDK, remember:

·=UDK= must be entered exactly as shown, in uppercase.

·You can select any printable character except:

ÐUppercase U, D, or K

ÐThe comma (,)

ÐThe equal sign (=)

ÐThe multinational umlaut accent character (..) combined with either U, D, or K.

·Do not use the space character or any other non-printing character such as the backspace, delete, or control keys.

·Since this character must be unique in the file, select one that you will not use often, such as the asterisk (*) or cent sign character (¢). Using an alphanumeric character is not recommended.

·If you need to print the UDK once you have begun a job, you must convert it back to a printable character by selecting a new UDK.

Line end

As stated earlier, some commands require a line end. If a line end is not necessary, it should not be entered, since it adds a physical line to your page and returns the current printing position to the left margin. However, omitting a required line end will cause an error in the job.

Line end configuration may differ from one host system to another. It may be either a carriage return (0DH) or a line feed (0AH). Ensure that the line end for the 4213 matches that of your host.

2-8 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE