Xerox 4213 manual Measuring a portrait

XES COMMAND LANGUAGE MODE

LLeft margin. The distance from the left edge of the page to the left side of the first character where each line is to be printed.

RRight margin. The distance from the left edge of the page to where the right side of the last character in each line is to be printed.

LLine end.

Where to place it After the Units command, before any printable data of the page for which it is to take effect. If the command is placed within printable data, it takes effect on the next page.

Example To set margins for an 216 by 279 mm portrait page: page height, 279 mm; top margin, 1 inch; bottom margin, 1 inch; left margin,

1.5inches; right margin, 7.5 inches from the left edge. With units of measure in five pixels (1/60 inches), enter:

Em660,60,60,90,450L

With units of measure in 1/300 inch (or pixels), enter:

Em3300,300,300,450,2250L

Refer to figures 2-5 and 2-6.

Figure 2-5.Measuring a portrait page

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 2-41