Xerox 4213 manual Sided/2-sided, Left Offset Registration

LJ SERIES 2D EMULATION

1-sided/2-sided

Purpose

Syntax

The 4213 can print on one side (1-sided) or both sides (2-sided) of a page.

E&l#S

Hex	1B 26 6C # 53
Dec	27 38 108 # 83

where # = 0 is 1-sided

#= 1 is 2-sided, long-edge binding

#= 2 is 2-sided, short-edge binding.

2-sided printing is not supported in the LJ Series 2D emulation when the manual bypass feature is used.

Left Offset Registration

Purpose

Syntax

This command specifies the position of the logical page across the width (short side) of the physical page.

E&l#U

Hex	1B 26 6C # 55
Dec	27 38 108 # 85

	where			#	is a positive or negative number expressed in
	decipoints (1/720th inch) and valid up to four decimal places. A
	positive value moves the logical page to the right along the
	width of the physical page except on the back side of sheets
	printed in				long-edge-binding 2-sided mode, where the logical
	page moves to the left. A negative value moves the logical page
	to		the	left,	except on the back side of sheets printed in long-
	edge-binding 2-sided mode, where it moves to the right.
Notes	·		Page orientation has no effect on this command.
	·	The value # represents an absolute move in relation to the
			default position of the logical page and not the current
			position.
	·	Positioning the logical page outside the printable area may
			cause loss of data.

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 3-15