Xerox 4213 manual Set baud rate, Set parity

INTERFACES

4.Press the Test B button.

5.Press the Last Page button C until SERIAL appears.

4. Press the Select D button to select SERIAL.

Set baud rate

Once SERIAL is selected, baud rate, parity and flow control can be set.

With SERIAL appearing on the User Interface:

1.Press the Test B button.

2.Press the Last Page C button until BAUD RATE appears.

3.Press the Test B button.

4.Press the Last Page C button to scroll through the baud rate options: 1,200, 2,400, 4,800, 9,600, 19,200. 9,600 is the factory default.

5.Press the Select D button once your chosen baud rate appears.

Set parity

With the baud rate appearing on the User Interface, follow these steps:

1.Press the Menu A button.

2.Press the Last Page C button until PARITY appears.

3.Press the Test B button.

4.Press the Last Page C button to scroll through the parity options: 7 BIT ODD, 7 BIT EVEN, 7 BIT MARK, 7 BIT SPACE, 8 BIT ODD, 8 BIT EVEN, 8 BIT NONE. 8 BIT NONE is the factory default.

5.Press the Select D button to select parity.

Note: For LJ2D emulation, 8 data bit mode is required.

1-12 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE