Xerox manual Margins, Text placement restrictions on the 4213 printer, Syntax EmH,T,B,L,RL

XES COMMAND LANGUAGE MODE

If you enter a change of setting within the printable contents of a page and the new setting for the bottom margin is below the current text position, the bottom margin goes into effect for the next page.

Setting illogical margins, (such as a top margin below a bottom one), or setting margins out of page boundaries causes the printer to revert to the default margins.

If the printer receives several Margins commands while formatting a page, the last command it receives will be used on the next page.

Text placement restrictions on the 4213 printer

The following restrictions apply to page boundaries on the 4213 printer:

·Any text printing beyond the bottom edge of the paper is printed on the next page.

·Any character printing beyond the right edge of the paper is not printed.

Margins

Purpose Sets all four margins for a page.

Syntax

EmH,T,B,L,RL

mInstruction to set margins.

H,T,B,L,R Margin values in units of either five pixels (1/60th inch or .42 mm) or one pixel (1/300th inch or .08 mm), with commas to separate values.

HHeight of the page. The distance between the top edge and the bottom edge of the page.

TTop margin. The distance from the top edge of the page to the baseline of the characters in the first line of text.

BBottom margin. The distance from the bottom edge of the page to the baseline of the last line of text.

2-40 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE