Xerox 4213 manual XES Command Language Mode

XES COMMAND LANGUAGE MODE

YThe y-coordinate of the starting point of the line; the distance in pixels from the page origin, along the y-axis, to the starting point.

LThe length of the line; the distance in pixels from the starting point to the end point.

TThe thickness of the line, in pixels.

SThe degree of ink shading on a scale of 0 to 15. If no shading is desired, the S value can be omitted. See figure 2-16 for the 15 degrees of shading.

,Commas separate these variables.

LLine end.

Where to place it At any point in the job where the line is desired.

Example See the sample that follows:

More The Line Draw commands create nongraphic lines; that is, lines that do not need graphic windows. Nongraphic lines can only be drawn on either the x- or y-axis, horizontally or vertically. Refer to ªWhat is a graphic window,ª for information on graphics windows.

The following figure shows a vertical line drawn on the y-axis of a short edge feed portrait page, the starting point of which begins at three inches across the page and 6 inches up. It is four inches long and 20 pixels thick. It is printed in black; no shade of grey is selected.

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 2-65