FieldServer FS-8700-43 instruction manual VESDA data format for command 12 Current Fault Status

FS-8700-43 VESDA Driver Manual Page 13 of 18

4.5.4.VESDA data format for command 12 (Current Fault Status)

This request returns the Current Fault Status in a BYTE data array. The format for the data is as follows:

Data Arrays

Column Title		Function	Legal Values
Data_Array_Name		Provide name for Data	Up to 15 alphanumeric
		Array	characters
Data_Format		Provides data format	BYTE
Data_Array_Length	Number of Data Objects		1 – 21

Client Side Map Descriptors

		Column Title		Function			Legal Values
		Map_Descriptor_Name		Name of this Map			Up to 32 alphanumeric
				Descriptor			characters
				Name of Data Array where
		Data_Array_Name		data is to be stored in the			As above.
				FieldServer
		Data_Array_Location		Starting location in Data		0
				Array
		Function		Function of Client Map			RDBC
				Descriptor.
				Name of Node to fetch data			One of the node names
		Node_Name					specified in “Client Node
				from
							Descriptor” above
		Data_Type		Data type			dig_input
		Length	Length of Map Descriptor				1-21 (must not overflow the
							data array)
		Address		Starting address of read		0
				block
		Command		The command id as given in		12
				the notes.
		Network		The network number		1-255
		Zone	The zone number			1-255
		Sector		The sector number		1-255
Data Block Description5
		BYTE offset			Function
	0				Number of faults
	1 - 20				Fault list

51 indicates TRUE; 0 indicates FALSE

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com