Xerox 4213 manual C2H5OH

XES COMMAND LANGUAGE MODE

Syntax

Where to place it

Example

Es

lInstruction to start subscripting.

sInstruction to stop subscripting.

Anywhere subscripting is desired, with the start command immediately before the first character to be subscripted, the stop command immediately after the last character to be subscripted.

To produce:

C2H5OH

Enter:

CEl2EsHEl5EsOH

More The subscript commands cannot be used to:

·Subscript a subscript

·Index down a page

·End a superscript.

The distance of a subscript character from a regular character depends on the current font size. Thus, if you want to use a smaller or larger font for the subscript, give the Font Change command immediately after Subscript Start and return to the original font before Subscript Stop.

In the example below, the regular letters are entered using font number 5, and the subscripts are entered using the smaller font number 6.

To produce:

C2H5OH

Enter:

E5CElE62E5EsHElE65E5EsOH

To underline a subscript at its own level, give the Underline Start command after the Subscript Start command.

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 2-71