Xerox 4213 System set up operators Pagecount Ðpagecount integer, Setsccinteractive, Setsccbatch

POSTSCRIPT EMULATION

	After the server has acknowledged the exit request, you are
	permitted to run a programme using statusdict operators that
	change persistent			parameters. Operators that set persistent
	parameters are marked with an asterisk.				To change these
	parameters, you must first exit the normal server mode. You can
	inquire about the current state of persistent parameters without
	using the exitserver mode, and accessing statusdict only.
	Parameters that remain in effect for the current job only can also
	be changed via statusdict only.
System set up operators
pagecount	Ðpagecount integer
	This operator returns the number of pages the controller has
	generated. It reflects the pages generated in all emulations, not
	just the Postscript emulation.
setprintername*	string setprinternameÐ
printername	string printername substring
	String represents the printer©s name and is printed on the
	configuration sheet. The name can be up to 32 characters long
	and should consist of printable characters. Avoid using the
	characters (:) or (@).
setsccinteractive*	Ðchannel baud options setsccinteractive
sccinteractive	Ðchannel baud options sccinteractive
	Because communications options can be selected through the
	User	Interface,	the	operator setsccinteractive is ignored by the
	PDL	interpreter	in	the printer. The operator sccinteractive
	reports the current communications options to the host.
setsccbatch*	channel baud options setsccbatch Ð
sccbatch	channel sccbatch baud options
	The	printer ignores		the setsccbatch operator because the user
	can select the communications options				through the User
	Interface. The sccbatch operator always returns the active
	communications options on the printer.

4-4 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE