Xerox 4213 manual Top Offset Registration, Sided Page Side Selection

LJ SERIES 2D EMULATION

Top Offset Registration

Purpose

Syntax

This command designates the position of the logical page across the length (long side) of the physical page.

E&l#Z

Hex	1B 26 6C # 5A
Dec	27 38 108 # 90

	where # is a positive or negative number expressed in
	decipoints (1/720th inch) and valid up to four decimal places. A
	positive value moves the logical page down along the length of
	the physical page except on the back side of sheets printed in
	horizontal-binding 2-sided mode, where the logical page moves
	up. A negative value moves the logical page up, except on the
	back side of sheets printed in horizontal-binding 2-sided mode,
	where it moves down.
Notes	· Page orientation has no effect on this command.
	· The value # represents an absolute move in relation to the
	default position of the logical page and not the current
	position.
	· Positioning the logical page outside the printable area may
	cause loss of data.

2-sided Page Side Selection

Purpose This command causes the printer to skip a page while printing in 2-sided. If a front or back page is being formatted while the command is sent to the printer, the printer stops formatting, ejects the current page, and prints on the side specified by the value #.

Syntax E &a#G

where # = 0 selects the next side

#= 1 selects the front side

#= 2 selects the back side.

3-16 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE