Xerox 4213 manual Underline Start/Underline Stop, Bold font simply

XES COMMAND LANGUAGE MODE

Where to place it	Anywhere bolding is desired, enter the Bold Start command
	immediately before the first character to be bolded and the Bold
	Stop command immediately after the last character to be bolded.
Example	To produce:
	It is possible to bold text without using a	bold font; simply
	insert the appropriate commands.
	Enter:
	It is possible to bold text Ebwithout using a bold font;
	Epsimply insert the appropriate commands.
More	In most cases, using a bold font gives better	results, especially
	for large sections of text.

Underline Start/Underline Stop

Purpose

Syntax

Syntax

Where to place it Example

Underlines text.

Eu

Ew

uInstruction to start underlining.

wInstruction to stop underlining. Anywhere underlining is desired.

To produce:

It is possible to underline text by using the following commands: Underline Start and Underline Stop.

Enter:

It is possible to underline textEuby using the following commandsEw: Underline start and Underline stop.

More Both the thickness of the underline and its distance from the character it underlines are determined by the size of the current font in the line. So if you underline in a large font and then change to a small font for the text in the next line, you may want to enter the Font Change command for the smaller font before entering the line end. This will prevent the underline for the larger font from crowding the smaller characters on the next line.

The underline character prints under the character descender.

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 2-69