Xerox 4213 manual How to download fonts from the host computer

XES COMMAND LANGUAGE MODE

How to download fonts from the host computer

The example below demonstrates how to download fonts from a host computer running on MS-DOS in parallel. You create and transmit three files:

·File 1 defines the UDK (if the escape character cannot be used) and initiates the command Font Load (or Font Add) to the printer.

·File 2 copies the UDK and Font Load or Font Add command to the printer, and copies the fonts to the printer.

·File 3 defines the UDK again and resets the printer with the Reset command.

1.Assume that you are running MS-DOS and have loaded the font diskette into drive A of your host computer. You are now ready to create File 1. You are using the Commercial At symbol (@) as a UDK.

At the C:> prompt on your computer screen, enter:

copy con:start.doc

(Press Return.)

=UDK=@@+F,Font Load

(Press Return.)

<CTRL>z

(Press Return.)

The file has been created to set the printer for font loading.

2.You are now ready to create File 2, which sends the commands and fonts to the printer.

At the C:> prompt enter:

copy con:download.bat

(Press Return.)

copy start.doc prn:

(Press Return.)

copy a:*.FNT prn:

(Press Return.)

copy stop.doc prn:

(Press Return.)

<CTRL>z

(Press Return.)

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 2-31