Xerox 4213 manual Tabs Vertical

XES COMMAND LANGUAGE MODE

Tabs Vertical

Purpose Defines tabs down the page, measuring from the top edge of the page. Once vertical tabs are set, whenever you press the vertical tab key on the host computer, the printer skips from the current text position to the next vertical tab position.

Syntax Evn1,n2,.....,n125 L

v

n1,n2,..,n125

Instruction to set vertical tabs

Tab settings starting from the top edge. Up to 125 tabs can be set in one command. Commas separate values. The positions of the first tab and tab intervals for U.S. and international paper, both landscape and portrait, appears in table 2-5.

The printer maintains up to 125 vertical tabs in memory per job. See table 2-6 for maximum tab values for portrait and landscape pages in letter and legal size.

LLine end.

Where to place it At the start of the job, or anywhere a vertical tab is desired.

Example Figures 2-9 and 2-10 show a line of tabs down an 216 x 279 mm landscape page. Figure 2-9 shows the settings in units of five pixels (1/60 inches). Figure 2-10 shows the same settings in units of one pixel (1/300 inches).

More Up to 125 vertical tabs may be set per job. If you attempt to tab past the bottom margin, the printer will skip to the top margin of the following page.

2-48 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE