Xerox 4213 manual Invoking the base table, Completed table download record

XES COMMAND LANGUAGE MODE

The last determination to be made is the record type. Since ISO characters are to be used in this table, either ª3º or ª4º is appropriate. The entire file then becomes:

E+TL

S40D00B8A3005D00A5005F00A800FFL

The components of this table record are shown in figure 2-37.

Figure 2-37.Completed table download record

Invoking the base table

Before sending the table data file to the printer, ensure to invoke the mapping table that is to serve as the base table.

When the printer receives the Character Reassignment command, it creates a new table by laying the new data over the mapping table that is currently in effect. Locations not specified in the table data remain the same in the new table as in the original table over which it was laid. (See figure 2-38.) In this example, the new data in the example discussed above is laid over the U.S. English table. The new table is illustrated in table 2-8.

2-118 XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE