Xerox 4213 manual XES Command Language Mode

XES COMMAND LANGUAGE MODE

YThe y-coordinate of the starting point of the line; the distance in pixels from the page origin, along the y-axis to the starting point.

LThe length of the line; the distance in pixels from the starting point to the end point.

TThe thickness of the line, in pixels.

SThe degree of ink shading on a scale of 0 to 15. If no shading is desired, the S value can be omitted. See figure 2-16 for the 15 degrees of shading.

,Commas separate the variables.

LLine end.

Where to place it At any point in the job where the line is desired.

Example See the sample that follows.

More The Line Draw commands create nongraphic lines; that is, lines that do not need graphic windows. Nongraphic lines can only be drawn on either the x- or y-axis, horizontally or vertically; they cannot be drawn diagonally. Refer to ªWhat is a graphic windowº for information on graphics windows.

The following figure shows a horizontal line drawn on the x-axis of a short edge feed portrait page, the starting point of which begins at four inches across the page and 6 inches up. It is two inches long and 80 pixels thick. It is printed in black; no shade of grey is selected.

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 2-63