Xerox 4213 manual Fill pattern bounded by a graphic figure

XES COMMAND LANGUAGE MODE

·The last command, Graphic Fill, selects pattern 7 and defines one seed point in the closed figure made by the line and two sides of the rectangle. Shown in the figure is the seed point location, at coordinates 170,250.

Egw1,2;,,300,300L

Egb5;3,3,297,297L

Egl;3,3,100,250,150,200,200,200,250,150,297,297L

Egf7;170,250L

Figure 2-32.Fill pattern bounded by a graphic figure

More If 0 for a user-defined pattern is entered for P, the fill pattern data is entered after the line end of the Graphic Fill command. User-defined data must be sixel encoded. Refer to appendix C for information on sixel encoding.

You cannot fill an area with more than one pattern.

A fill must start in a closed figure, that is, one surrounded by printed lines. However, the edge of the window can also serve as a boundary for a fill.

The edge of the page cannot serve as a boundary for a fill.

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 2-101