PMI - Phoenix PX1152M specifications Technical Specifications, PX2181, PX1122M, PX2122, PX2152

Technical Specifications:

	PX1122M	PX1152M		PX2122	PX2152	PX2181
Freq. Response1 (-3 dB):	70 Hz - 15 kHz		TBA	90 Hz - 11 kHz	60 Hz - 11 kHz	45 Hz - 160 Hz
Freq. Range1 (-10 dB):	55 Hz - 19 kHz		TBA	70 Hz - 18 kHz	50 Hz - 18 kHz	40 Hz - 180 Hz
Rec. Hipass Frequency:	50 Hz		TBA	80 Hz	40 Hz	35 Hz
Axial Sensitivity1:	98 dB (1W/1m)		TBA	102 dB (1W/1m)	101 dB (1W/1m)	105 dB (1W/1m)
Max Calculated SPL1:	132 dB		TBA		138 dB	141 dB
Horizontal Coverage:		90°		30°, or 45°	60°, or 45°	Omnidirectional
Vertical Coverage:		45°		45°, or 30°	45°, or 60°	Omnidirectional
Power Handling	600W Continuous, 2400W Peak			N/A	1200W Continuous, 4800W	N/A
(Passive):					Peak
LF Power Handling	500W Continuous, 2000W Peak				1000W Continuous, 4000W Peak
(Biamp):
HF Power Handling			80W Continuous, 320W Peak			N/A
(Biamp):
LF Transducer:	(1) DVX3121, 12 in.		TBA	(2) DVX3121, 12 in.	(2) DVX3150, 15 in.	(2) DVX3180, 18 in.
	(305 mm) Driver			(305 mm) Driver	(381 mm) Driver	(457 mm) Driver
HF Transducers:		(2) ND2-16, 2 in. (50mm) Diaphragm Compression Drivers
Crossover Frequency:	1400 Hz		TBA	1600 Hz	1900Hz	80 Hz - 125 Hz
Impedance (Passive):	8 Ohms Nominal			N/A	4 Ohms Nominal	N/A
LF Impedance (Biamp):	8 Ohms Nominal				4 Ohms Nominal
HF Impedance (Biamp):			8 Ohms Nominal			N/A
Connectors:	(3) Neutrik Speakon NL4's				(2) Neutrik Speakon NL4's
Enclosure Material:				18mm Plywood with Black EVCoatTM
Suspension:	Rigging Point for PX-SAM Strong-Arm Accessory			(8) M10 Points - (6) on Top and (2) on Bottom of Enclosure		N/A
Grille:		Polyester Powder Coated, 16GA Galvanized Steel, with Rotatable Logo
Dim (H x W x D):	546mm x 366mm x 305mm		TBA	1219mm x 457mm x 445mm		1219mm x 569mm x 758mm
	(21.50" x 14.42" x 12.04")			(48.00" x 18.00" x 17.50")		(48.00" x 22.42" x 29.85")
Net Weight:	23.1 kg (51 lbs)		TBA	50.9 kg (112 lbs)	45.6 kg (100.5 lbs)	88.5 kg (195 lbs)
Shipping Weight:	25.2 kg (56 lbs)		TBA	53.1 kg (117 lbs)	47.9 kg (105.5 lbs)	90.7 kg (200 lbs)
Recommended Amplifier:	Electro-Voice® CP3000S				Electro-Voice® CP4000S
				PX-D1 Dolly Kit
Accessories:	PX-SAM Strong-Arm Kit			PX-G1 Phoenix Grid		PX-D2 Dolly Kit
				EBK-M10 Eyebolt Kit

1Half Space measurement.

12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043

www.electrovoice.com

© Telex Communications, Inc. 6/2006

Part Number 38110-533 Rev 2

U.S.A. and Canada only. For customer orders, contact the Customer Service department at

800/392-3497 Fax: 800/955-6831 Europe, Africa and Middle East only. For customer orders, contact the Customer Service department at

499421-706 0 Fax: 49 9421-706 265 For warranty information, contact the Service Repair department at:

616/695-6831 or 800/685-2606

For technical assistance, contact Technical Support at:

866/78AUDIO

Specifications subject to change without notice.