to “SP” and press <ENTER>
11.ALARM SETTING
Alarm parameters can be set on this page.
ALARM PIN
Choose an alarm connector what you want to set its status.
ALARM SWITCH
Turn ON/ OFF alarm function.
ALARM TYPE
There are two kind of alarm types can be selected. One is normal open the other is normal close.
ALARM ACTION
User can choose what kind of action should be executed when the alarm condition taken place. There are two kind of alarm actions can be set. One is go to a specific position when alarm taken place. The other is executing sequence function when alarm condition taken place.
Point Mode
PRESET POS.
Enter a preset position where the dome will go to when alarm pin is triggered.
Sequence Mode
SEQUENCE
Enter the sequence line you wish the Dome execute when alarm pin is triggered.
DWELL TIME (Seconds)
Camera will stay at the preset position for “DWELL TIME” seconds then go back to previous position. If you select “Always”, dome will go to the preset position and stay there until alarm condition is released or user move its joystick on keyboard.
EXIT
Quit the ALARM SETTING menu.
12.HOME SETTING
Home parameters can be set on this page.
HOME FUNC
Turn home function on or off.
SELECT MODE (AUTOPAN/ SEQUENCE/ CRUISE/ PRESET)
Dome will go to execute this mode function when home function is enabled and the “RETURN TIME” is reached.
RETURN TIME (MINUTES)
Dome will start to count “RETURN TIME” when user move the camera to arbitrary position.
AUTOPAN/ SEQUENCE LINE/ CRUISE/ PRESET POS
28
