2. SETTING UP AND STORING
2-1 SETTING UP
Gently release the clipped area (as marked with arrow) of the right and left stages as illustrated.
OPEN OPEN
STAGE STAGE
Note:- It may be damaged by un- latching the stages putting hands on other position not shown by arrows.
-When the accessory case is housed inside, be careful not to drop it.
Connect the
Note: - Before starting connection, turn OFF the power supply to each unit.
Connect the AC adaptor, and turn the power switch [POWER] to ON.
Instruction for location:
-Please note that the image may be affected by unsightly shadows caused from other lights in the room or from the outside. This effect can usually be eliminated or reduced by repositioning the
Convex part of the arm side
Latch parts
Convex part
of the base unit
Convex part of the main stage side
2-2 STORING
Make sure that the power switch [POWER] is OFF, and then remove all cords connected to the Presenter.
Move the camera head to be in line with the arm horizontally.
House the auxiliary stage inside the main stage, and then fold the main stage. At this time, house the accessory case inside the stage.
Note: - Confirm that the accessory case is closed firmly before housing.
Concave part of the main stage
AC adaptor |
Video cable |
<Accessory case> |
Make sure that all movable parts are put back to storing position accordingly.
- 11 -
