English
Mask Function
You can mask a section of the output image.
Mask settings
From the Camera Mode OSD Menu, select [Function Setting] → [Mask]. The level bar to set [Darkness] is displayed, and you can then set the darkness for the masked areas with the [] and [] buttons on the operating panel.
Mask operations
When you press the [] button on the remote control while the output image is Camera Image or SD Mode, the mask display uses the darkness set previously.
You can move the masked area using the [], [], []. and [] buttons on the remote control.
The mask display is cleared when you press the [] button on the remote control again.
VARIOUS FUNCTIONS AND OPERATIONS
N o t e
•The mask function cannot be used when the output image is PC.
•In the optical zoom range, the mask size remains the same. In the digital zoom range, the mask size expands and contracts depending on the magnification ratio.
•Cannot mask the entire output image.