PRECAUTIONS FOR USE AND INSTALLATION
*Never aim the camera at the sun.
Never aim or point the camera at the sun even if you are not shooting.
*Do not shoot intense light.
Strong light such as a spot light on the image plane will cause blooming or smear. When strong light comes into the image plane, vertical stripes may appear on it. However, this does not mean that the camera is defect.
*Take precautions when handling a camera. Do not drop your camera, or give it a strong shook or vibration. This may cause camera to malfunction.
*Do not touch internal parts.
Be sure not to touch the internal parts. This may cause to electrical shock.
*Do not let the camera get wet.
Install the camera at the place where it will not get wet.
Should it gets wet, turn off the power immediately and contact your dealer.
*Install your camera where no video noise appears.
When camera cables have been laid near electric wires or television receivers, a noise may interfere the image.
If noise occurs, relocate cables or reinstall equipment.
*Check the ambient temperature and humidity. Avoid using camera in areas where temperature is consistently hotter or colder than the specified range (See Specifications chart below) or poor image quality or damaged parts may occur. Precautions should also be taken to avoid areas of high humidity.
*Should you notice any trouble.
If any trouble occurs while you are using the camera, turn off the camera and contact your dealer. Failure to do so may cause damage to the camera.
*The
ELMO CO., LTD.
OVERSEAS SUBSIDIARY COMPANIES
ELMO Mfg. Corp. | ELMO Canada Mfg. Corp. | ELMO (Europe) G.m.b.H. |
1478 Old Country Road, | 44 West Drive, Brampton, | Neanderstr. 18 |
Plainview, NY | Ontario, L6T 3T6, | 40233 Dusseldorf, |
U.S.A. | Canada | Germany |
Tel. | Tel. | Tel. |
Fax. | Fax. | Fax. |
Web:http://www.elmousa.com/ | Web:http://www.elmocanada.com/ | Web:http://www.elmo.de/ |
6X1NHFF02 |
| Printed in CHINA |
- 7 -
