5.Connect the power cord and the BNC cable, and then mount the main body on the camera body. (Fig. 6).
Weight of the camera mounting bracket and mounting metal
piece is 1600g(3.52 lbs).
Make sure that the ceiling or wall W a r n i n g is strong enough to support the
weight of the camera mounting bracket and mounting metal piece altogether.If not strong enough, the device may drop and injure the personnel around.
·When you connect the Power cord and the BNC cable, roll the waterproof tape to prevent water damage as the figures below indicate.
Power cord
BNC cable
Camera mounting bracket
BNC cable
Power cord
Main body
(Fig.6)
Please do not hold a part of the lens, when adjusting the image direction. It may cause a breakdown of the lens.
C a u t i o n
6.While watching the monitor, adjust the image direction.
·Right/left direction (Fig.7)
Rotate the base pan to right or left, and adjust the right/left direction.
·Up/down direction (Fig.8)
Loosen the tilt lock screw, and adjust up/down direction.
After setting the up/down direction, fasten the tilt lock screw.
Base pan
Lens
(Fig.7)
7
